Differences

This shows you the differences between two versions of the page.

--- notes:misc [2026/04/05 01:28] – azman
+++ notes:misc [2026/04/05 02:08] (current) – removed azman
@@ Line 1: / Line 1: @@
-====== General Notes ======
-Miscellaneous...
-===== SQ11 Info =====
-Useful info on sq11 mini cam...
-<file text sq11_info.txt>
-Operating Instructions SQ11
-Charging
-Attention! Before using for the first time, fully charge the mini camera
-battery!
-This mini video camera has a built-in lithium-ion battery. You can perform
-charging in one of the following ways:
-. Connect the mini video camera to the USB port of your PC, stop recording
-   first.
-. Connect the mini camera to a charger from a 220V network or a portable 5V
-   charger. In this case, you can continue to use the mini-camera in the
-   charging process. In the charging process, the blue and red LEDs will light
-   constantly.
-After the mini camera battery is fully charged, the blue LED will light
-constantly and the red LED will turn off.
-- If the built-in battery is empty or there is not enough space on the memory
-  card to continue, the blue and red LEDs on the mini camcorder will blink for
-seconds simultaneously, after which the mini camcorder will save the
-  recorded video and automatically turn off.
-- If the memory card is not installed, the blue and red LEDs of the Mini
-  Recorder will blink simultaneously for 5 seconds, after which the Mini Camera
-  will automatically turn off.
-- If the camcorder is in the standby mode and does not take any action on it,
-  the camcorder automatically turns off after 1 minute to save the charge of
-  the built-in battery.
-Video recording
-- Shooting video with a resolution of 1280X720P
-Press the <On / Off> button to turn on the mini camera - the blue LED will
-light up - the mini camcorder is in the video recording standby mode with 720p
-quality. Press the <On / Off> button once to start recording video - the blue
-LED will blink 3 times and go out - 720p video is recorded. The video will be
-automatically saved every 5 minutes. To stop recording, press the <On / Off>
-button.
-- Shooting video with a resolution of 1920X1080P
-Press the <On / Off> button to turn on the mini camera - the blue LED will
-light constantly. Press the <Mode> button once to enter the video capture mode
-with 1080p resolution - the red and blue LEDs will light simultaneously, the
-mini camera is in the video recording standby mode with 1080p quality. To start
-recording, press the <On / Off> button once - the blue LED will go out, and the
-red LED will blink 3 times and go out - the video is recorded with a quality of
-p. The video will be automatically saved every 5 minutes. To stop
-recording, press the <On / Off> button.
-- Motion sensor video recording
-To do this, while in the 720p or 1080p video recording standby mode, press and
-hold the <Mode> button of the mini video camera for 3 seconds - the camcorder
-enters the motion sensor recording mode. If motion is detected, the video
-recording will start automatically, with red and blue LEDs blinking at the same
-time. When recording motion sensor, the video recording is automatically saved
-every 5 minutes.
-- Photo
-Press the <On / Off> button to turn on the camera - the blue LED will light up.
-Press the <Mode> button twice to enter the photographing mode - the red LED
-will stay lit. To take a picture, press the <On / Off> button once - the red
-LED blinks once, the photo is saved. The resolution of the received photos is
-x3024.
-- Night light
-Press the <On / Off> button to turn it on. Press and hold the <On / Off> button
-for 2 seconds - the red LED will blink twice - the night illumination is on. To
-turn off the night illumination, press and hold the <On / Off> button for 2
-seconds, the red LED will blink three times - the night illumination is turned
-off.
-- Shutdown
-To turn off the camcorder, press and hold the <On / Off> button for 6 seconds.
-If the Mini Camcorder is in the standby mode and is not in use, it
-automatically turns off after 1 minute.
-- Viewing files
-Do connect the camcorder in the off state to the computer - after a few seconds it
-will automatically be detected as a removable disk. The blue indicator will
-indicate the transfer of information, and the red indicator will indicate the
-charging of the built-in battery.
-Parameters
-- Video resolution: 1920x1080, 1280x720
-- Frame rate: 15, 30 frames per second
-- Video file type: AVI
-- Photo resolution: 4032x3024
-- Photo file type: JPEG
-- Viewing angle: 140 °
-- Night illumination: 6 IR LEDs (range of 5 meters, DO NOT emit light!)
-- Motion sensor: Yes (range 5 meters)
-- Recording while charging: +
-- Duration of work:
-  > 100 minutes (1 hour 40 minutes) in constant recording mode
-  > About 5 hours in motion sensor mode
-  > 24/7 24/7 clock when external power is connected
-- Support for memory cards: Micro SD up to 64GB
-- Cyclic recording: +
-- Operating temperature: -10 ° С + 60 ° С
-- Humidity of the environment: 15-85%
-- Dimensions: 23x23x23 mm, 15 grams
-Mini camera SQ11 with night illumination, motion sensor and viewing angle 140°.
-Mini DV SQ11 is an improved version of the previous SQ8 and SQ9
-The camera SQ11 has a built-in motion sensor, can shoot photos with a
-resolution of 4032x3024, and can also be used for recording in the process of
-charging from a 220V network or portable chargers, which increases the battery
-life by 30-40 times.
-</file>
-===== Solar panel stuff =====
-<file text solar_power_system_calc.txt>
-- inverter?
-- battery?
-- solar panel?
-) load calculation
-- assume 4x25w led light, 2x80w fan, 1x40w tube light, 1x50w tv
-- total power = 100w + 160w + 40w + 50w = 350w
-) inverter selection
-- load = 350w (oonsider: 500w)
-- recommended: 800w-1000w
-) battery selection
-- assume 12v dc battery
-- for 350w ac load, i(dc) = 350w/12v = ~30a
-- assume battery operation of 8h
-- battery capacity = 30a x 8h = 240ah
-# 250ah battery available!
-) battery charging current calculation
-- assume 250ah
-- charging current = ~10% current rating (Ah)
-- charging current = 25A
-) solar panel selection
-- solar panel current = charging current + load current = 25 + 30 = 55A
-- solar panel power = 12v x 55A = 660W
-- solar panel options: 125w / 180w / 375w / 440w
-- solar panel count = 660W / 180W = ~4!
-</file>
-===== Chakras (From Avatar:The last Airbender) =====
-Interesting...
-<file text chakras.txt>
-release all 7 chakras (from avatar :p)
--earth (base of spine) root
-  => survival, block by fear
-  => release/surrender all fears
--water (lower ab - below navel) sacral
-  => pleasure, block by guilt
-  => release all blame/guilt (forgive yoursef)
--fire (stomach) solar plexus
-  => power, block by shame
-  => release letdowns and disappointments
--love (heart)
-  => love, block by grief
-  => release all sadness and loss
--sound (throat)
-  => truth, block by lies
-  => release denials and lies
--light (center of forehead) @third eye
-  => insight, block by illusion
-  => release all illusions (collective conscious)
--thought (crown of the head)
-  => pure cosmic energy, block by earthly attachment
-  => release all earthly attachments
-</file>
-====== FFmpeg ======
-<code>
-ffmpeg -i "concat:vts_01_0.vob|vts_01_1.vob" -vcodec libx265 ~/temp/test.mp4
-ffmpeg -i test.mp4 -codec:a aac -b:a 128k -ac 2 -af volume=10 -codec:v copy test1.mp4
-ffmpeg -i in.mp4 -c:v copy -c:a copy -map_chapters -1 out.mp4
-ffmpeg -itsoffset 1 -i vsrc.mp4 -i vsrc.mp4 -c:a copy -c:v copy -map 0:v:0 -map 1:a:0 vdst.mp4
-</code>